Sunday 1 March 2015

Removing the Karmann Ghia nose



















Here is the drivers side wing with the air intake boxes removed.  You can see that there is rot and the panels are barely welded together.  The other side was just as bad.....


OK, so with a little it of work, carefully grinding out welds the front panel is off.


On closer inspection, the bad workmanship continues so I also removed the inner wheel well panel.


OK, so here we are with very little left.  It is likely I will remove the top side repair panels as well.
Whilst this is all open, I will prep the whole are and get a it in etch primer.