Replacement Nose and inner wing panels including fresh air intake vents

Haven't been able to work on the car for a while, but got some free time and decided to remove the patch underneath the fresh air intake box.

Previous repairs on the car have been carried out pretty poorly, and I imagine here is no different.

As suspected, rot left under the patch, and this probably passes up into the air intake box as well.

The whole of the front of the car has been replaced with new panels quite poorly, and to top it off the bonnet is a bad fit.

So I have decided that I should remove all of the repair panels on the front of the car and refit properly.

Luckily enough, all of the panels have been welded with very poor blobs of weld that can be carefully cut without damaging either panel.

Here is the long fresh air section removed.